Filter
Top Products
1Install and cable a G600 cabinet
Check AC power and ground for G600
S8100 Installation and Upgrades 75
November 2003
Figure 9: G600 650A power supply
t
Connect cabinet’s grounds and other grounds
Follow these additional grounding requirements:
• The approved ground wire must be green, 6 AWG (#40) (16 mm
2
), copper, stranded wire. This is
in addition to the ground wire in the AC power cord.
• Bond every approved ground at the single-point ground to form a single grounding electrode
system.
• Connect the cable as shown in Figure 10, Single-cabinet G600 grounding, on page 76 for a single
G600 cabinet, or Figure 11, 2-cabinet G600 grounding,
on page 77 for two or three G600
cabinets.