Filter
Top Products
1 Install and cable a G600 cabinet
Cable a G600 system
80 S8100 Installation and Upgrades
November 2003
Figure 13: G600 cable connections
Cable a 2-cabinet G600 system
NOTE:
See Cable a 3-cabinet G600 system on page 84 for a 3-cabinet configuration.
1 Remove the bottom panel and fan assembly from Cabinet B (port cabinet).
2 Remove the fan assembly from Cabinet A (processor cabinet).
3 Remove the right TDM-/LAN-bus terminator from Cabinet A, and install it on the left TDM-
/LAN-bus pin field on Cabinet B. See Figure 14, Shift TDM-/LAN-bus terminator from Cabinet
A to Cabinet B, on page 81.
!
WARNING:
Be sure to install each TDM-/LAN-bus terminator with the arrow on its back pointing upward.
Figure notes
1 IP Media Processor adapter
2 259A adapter for C-LAN
3 Processor Interface cable (slot 2)
4 Tie-wrap anchor point
crdpadp KLC 050901
2
1
3
4