Filter
Top Products
3 - 82
3 Setup
MITSUBISHI CNC
【#3014】 stap 2 Tap rotation speed (Gear: 01)
Set the maximum spindle speed during tapping cycle with gear 01.
---Setting range---
0 to 99999 (r/min)
【#3015】 stap 3 Tap rotation speed (Gear: 10)
Set the maximum spindle speed during tapping cycle with gear 10.
---Setting range---
0 to 99999 (r/min)
【#3016】 stap 4 Tap rotation speed (Gear: 11)
Set the maximum spindle speed during tapping cycle with gear 11.
---Setting range---
0 to 99999 (r/min)
【#3017】 stapt 1 Tap time constant (Gear: 00)
Set the time constant for constant inclination synchronous tapping cycle with gear 00 (linear
acceleration/deceleration pattern).
---Setting range---
1 to 5000 (ms)
【#3018】 stapt 2 Tap time constant (Gear: 01)
Set the time constant for constant inclination synchronous tapping cycle with gear 01 (linear
acceleration/deceleration pattern).
---Setting range---
1 to 5000 (ms)
【#3019】 stapt 3 Tap time constant (Gear: 10)
Set the time constant for constant inclination synchronous tapping cycle with gear 10 (linear
acceleration/deceleration pattern).
---Setting range---
1 to 5000 (ms)
【#3020】 stapt 4 Tap time constant (Gear: 11)
Set the time constant for constant inclination synchronous tapping cycle with gear 11 (linear
acceleration/deceleration pattern).
---Setting range---
1 to 5000 (ms)