Filter
Top Products
Appendix 2 - 5
MDS-D-SVJ3/SPJ3 Series Instruction Manual
Appendix 2-1 CM10-SPxxS-x(D6) plug connector
(6) Back clamp nut tightening, shell tightening
[1] To prevent the straight back shell from loosening, coat 2 threads of the circumference of the
straight back shell with adhesive.
Recommended adhesive: 1401B (Three Bond Co., Ltd.)
[2] Rotate the back shell coupling of the connector and temporarily tighten the straight back shell.
* When tightening temporarily, match the concavity and convexity of the plug shell with those of
the angle back shell.
(You can confirm the correct connection of concavity and convexity waving lightly back shell
just before inserting to BS coupling.)
Straight back shell
Straight back shell
Back shell coupling
Back shell coupling
Temporarily
tighten
Adhesive (to be coated to 2
threads of the circumference)
Back shell coupling
Plug shell concavity and
convexity
Back shell concavity and
convexity