Filter
Top Products
Appendix 2 - 6
Appendix 2 Cable and Connector Assembly
MITSUBISHI CNC
[3] Fix the 2 surface width of the angle back shell on the tightening guide.
[4] Set the tightening wrench adjusting to the back shell coupling.
[5] With the wrench, tighten the back shell coupling to the angle back shell.
Recommended tightening torque: 5N•m
(Note1) When setting the work to the wrench, adjust it to the 2 surface width.
To remove, take the reverse steps.
(7) Insert a busing and a cable clamp
Insert the bushing and the cable clamp in the back shell.
(Note) After the Bushing insert, confirm that cable position should be inside of Bushing.
19
17
20
Back shell
Back shell coupling
Set
Tightening guide
Tightening guide
Back shell
wrench
Back shell
wrench
Tighten
* Referential dimensions for
back shell tightening guide
(Back shell width)
Thickness:
10
* Recommendation:
Tightening guide
(357J-50494T)
٨Recommended jigs and tools : Back shell wrench (357J-51333T)
Bit (357J-51344T)
Torque wrench (CL6N x 8D,Tonichi Mfg.)
* Recommended tightening guide: (357J-50494T)
Cable clamp
Cable
Bushing
Back shell
Insert