Filter
Top Products
1 - 13
MDS-D-SVJ3/SPJ3 Series Instruction Manual
1-2 Installation of spindle motor
1-2 Installation of spindle motor
1-2-1 Environmental conditions
(Note) Refer to each spindle motor specifications for details on the spindle motor vibration conditions.
1. Do not hold the cables, axis or detector when transporting the motor. Failure to observe this could
lead to faults or injuries.
2. Securely fix the motor to the machine. Insufficient fixing could lead to the motor deviating during
operation. Failure to observe this could lead to injuries.
3. When coupling to a servomotor shaft end, do not apply an impact by hammering, etc. The detector
could be damaged.
4. Never touch the rotary sections of the motor during operations. Install a cover, etc., on the shaft.
5. Do not apply a load exceeding the tolerable load onto the servomotor shaft. The shaft could break.
Failure to observe this could lead to injuries.
6. Do not connect or disconnect any of the connectors while the power is ON.
Environment Conditions
Ambient temperature 0°C to +40°C (with no freezing)
Ambient humidity 90%RH or less (with no dew condensation)
Storage temperature -20°C to +65°C (with no freezing)
Storage humidity 90%RH or less (with no dew condensation)
Atmosphere
Indoors (Where unit is not subject to direct sunlight)
No corrosive gases, flammable gases, oil mist or dust
Altitude
Operation/storage: 1000m or less above sea level
Transportation: 10000m or less above sea level
CAUTION