Filter
Top Products
Appendix 2 - 14
Appendix 2 Cable and Connector Assembly
MITSUBISHI CNC
(7) Tightening an angle back shell
[1] To prevent loosening, the adhesive should be applied to the angle back shell by two threads around
the circumference.
Recommended adhesive: 1401B (Three Bond Co., Ltd.)
[2] Rotate and temporarily tighten the back shell coupling by setting the connector and the angle back
shell to the specified angle.
* When tightening temporarily, match the concavity and convexity of the plug shell with those of
the angle back shell.
(You can confirm the correct connection of concavity and convexity waving lightly back shell
just before inserting to BS coupling.)
Adhesive
(To be coated to two
threads of the
circumference)
Angle back shell
Angle back shell
Back shell coupling
Back shell coupling
Plug shell concavity and
convexity
Back shell concavity and
convexity