Filter
Top Products
Appendix 2 - 15
MDS-D-SVJ3/SPJ3 Series Instruction Manual
Appendix 2-2 CM10-APxxS-x(D6) angle plug connector
[3] Fix the 2 surface width of the angle back shell on the tightening guide.
[4] Set the back shell wrench adjusting to the 2 surface width of the back shell coupling.
[5] With the wrench, tighten the back shell coupling to the angle back shell.
Recommended tightening torque: 5N•m
(Note 1) When setting the work to the wrench, adjust it to the 2 surface width.
To remove, take the reverse steps.
19
15
Tightening guide
Torque wrench
Tighten
(Back shell width)
Angle back shell
Back shell
coupling
Angle back shell
wrench
Tightening guide
(Note) To change the back shell angle, adjust the toothing position of the plug shell
and back shell.
* Referential dimensions for back
shell tightening guide
Set
Set
* Recommendation:
Tightening guide
(357J-52658T)
٨Recommended jigs and tools : Back shell wrench (357J-51333T)
Bit (357J-51344T)
Torque wrench (CL6N x 8D,Tonichi Mfg.)
* Recommended tightening guide: (357J-52658T)