Filter
Top Products
Appendix 2 - 19
MDS-D-SVJ3/SPJ3 Series Instruction Manual
Appendix 2-2 CM10-APxxS-x(D6) angle plug connector
(11) When using a conduit
[1] Tighten the nipple of conduit connector on the plug connector (CM10).
[2] Set the conduit on the nipple of conduit connector.
[3] Fix the conduit to the plug connector (CM10). If the conduit is used in a moving part, fix the conduit with
a saddle, etc. so that no load is applied to the plug connector (CM10) and to the conduit connector.
If the conduit is fixed with a saddle, etc., make sure that no load is applied to the fixing area.
Set the protective cover (rubber etc.,) on the conduit to avoid cable damage.
Recommended conduit
Type: VF Type: SR Type: FBN Type: EM Type: VFS Type: SRK etc
Recommended connector
Recommended connector Applicable connector type Applicable cable range
RCM103S CM10-SP10S-S(D6)/CM10-AP10S-S(D6) φ4.0 to φ6.0mm
RCM103M CM10-SP10S-M(D6)/CM10-AP10S-M(D6) φ6.0 to φ9.0mm
RCM104L CM10-SP10S-L(D6)/CM10-AP10S-L(D6) φ9.0 to φ12.0mm
[1]
[2]
[3]
Plug connector
Plug connector
Plug connector
Conduit
connector
(nipple)
Conduit
connector
Conduit
connector
Cable
Conduit
Conduit
Saddle
Protective cover
(rubber etc.,)