Filter
Top Products
7 - 11
MDS-D-SVJ3/SPJ3 Series Instruction Manual
7-3 Adding and replacing units and parts
<MDS-D-SVJ3-10NA/20NA/35NA, MDS-D-SPJ3-22NA/37NA>
When assembling, take care so that
the fan does not overlap the chassis.
Open the fan guard.
Pull out in a diagonal direction
and remove it from the latch.
Direction of
the fan wind
Disconnect the connection connector of
the fan mounted on the unit side face.
Remove the mounting screws.
Remove the latch.