140
(3) Deviation counter clearing program
This program clears the deviation counter to 0.
(a) Program detail
As X47 is turned on, the deviation counter is cleared to 0.
(b) Execution condition
(c) Device used by the user
(d) Program example
Item Setting detail
Deviation counter clear command
1: Clear the deviation counter
Check item Condition Note
I/O signal
WDT error, H/W error signal (X10) OFF
BUSY signal (X14) OFF
Error detection signal (X18) OFF
Synchronization flag (X24) ON
Device Description
X47 Deviation counter clear command
D86 Deviation counter clear request
M10 Deviation counter clearing completion check
Cd.4
Deviation counter clear command
Command deviation counter clear to the
QD73A1.
Command to check the deviation counter
clear.
Completes clearing the deviation counter.