Filter
Top Products
236
CHAPTER 13 COMMON FUNCTIONS
Functions referred to as "common function" can be used regardless of control method when necessary.
Common functions can be used on GX Works2.
13.1 Module Status Monitor Function
The "module status monitor function" monitors the module information, switch setting information, and external I/O
signal information. The module's detailed information can be displayed on the system monitor of GX Works2.
(1) Hardware LED information
The following LED statuses are displayed.
Item Value
Condition to be 0001
H
RUN
• 0000
H
: Indicates that the LED is off.
• 0001
H
: Indicates that the LED is on.
Operating normally (same as the RUN LED)
ERR Error occurrence
BUSY During positioning
ZERO Adjusting zero
GAIN Adjusting gain
SV RDY Servo READY signal (READY) ON
DOG Near-point dog signal (DOG) ON
STOP Stop signal (STOP) ON
FLS Upper limit signal (FLS) ON
RLS Lower limit signal (RLS) ON
CHG Speed-position switching command signal (CHANGE) ON