Filter
Top Products
222
(3) Setting the in-position function
The following table lists the data to be set, setting condition, and check timing.
Setting item
Setting
range
Default
value
Setting condition
Check timing of
the set data
Buffer
memory
address
(decimal)
In-position
range
1 to
20479pulse
5pulse
The data can be set anytime.
Note that the set data at the rise
(ON) of a start signal is used for
the operation. If the data is
written when BUSY signal
(X14) is on, the data will be
accepted at the rise (ON) of the
next start signal.
• When a positioning
start signal (Y21 to
Y23) is turned on
• When a JOG start
signal (Y24, Y25) is
turned on
• When OPR start
signal (Y20) is
turned on
24
Pr.8