Filter
Top Products
173
CHAPTER 7 PROGRAMMING
7
7.4 When Using the Module in a Remote I/O Network
7.4.6 Control change program
(d) Program example
Command a current value change.
New current value (0pulse)
Set a new current value to the QD73A1.
Current value change
Completes the current value change.
Read the current value change from the
QD73A1.
Completes checking the current value
change.
Command to check the current value
change again when it is incomplete.
Request a current value change to the
QD73A1.
Command to check the current value
change.