Filter
Top Products
4 - 3
MELSEC-
A
4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT
4.1.2 Names of each part
The names of each D75P2 part are shown below.
*1: Since a hardware version L or later, or serial number (first five digits) of "16041" or later, the indicator
components have been changed to LED modules.
(No change is made to the information to be indicated.)
For details, refer to "13.4 LED display function".
1) Corresponding axis indicator LED
Indicate the axis corresponding to the display message of "8) 17-segment LED".
2) CC-Link status indicator LEDs
Display the power supply status and data communication status.
3) Transmission speed setting switch
Set the data communication speed.
4) Station number setting switches
Set the station number of the D75P2.
5) LED display mode select switch
Every time this switch is pressed, the information displayed by "1) Axis display
LEDs" and "8) 17-segment LED" changes.
6) Reset switch
Press this switch to initialize the input signal, remote registers and operation
processing.