Filter
Top Products
2 - 7
MELSEC-
A
2 SYSTEM CONFIGURATION
PLC CPUs that can use the CC-Link dedicated commands
The PLC CPUs that can use the CC-Link dedicated commands are the following
models.
ACPU
A1SHCPU, A1SJHCPU, A2SHCPU
A2UCPU, A2UCPU-S1, A3UCPU, A4UCPU (Software version Q
(manufactured in July, 1999) or later) *
1
A2USCPU, A2USCPU-S1 (Software version E (manufactured in July,
1999) or later) *
2
QnACPU
Q2ACPU, Q2ACPU-S1, Q3ACPU, Q4ACPU, Q2ASCPU, Q2ASCPU-
S1, Q2ASHCPU, Q2ASHCPU-S1 (Function version B or later)
QCPU (A mode)
Q02CPU-A, Q02HCPU-A, Q06HCPU-A
QCPU (Q mode)
Q00JCPU, Q00UJCPU, Q00CPU, Q00UCPU, Q01CPU, Q01UCPU,
Q02CPU, Q02HCPU, Q02PHCPU, Q02UCPU, Q03UDCPU,
Q03UDECPU, Q03UDVCPU, Q04UDHCPU, Q04UDEHCPU,
Q04UDVCPU, Q06HCPU, Q06PHCPU, Q06UDHCPU, Q06UDEHCPU,
Q06UDVCPU, Q10UDHCPU, Q10UDEHCPU, Q12HCPU, Q12PHCPU,
Q12PRHCPU, Q13UDHCPU, Q13UDEHCPU, Q13UDVCPU,
Q20UDHCPU, Q20UDEHCPU, Q25HCPU, Q25PHCPU, Q25PRHCPU,
Q26UDHCPU, Q26UDEHCPU, Q26UDVCPU, Q50UDEHCPU,
100UDEHCPU
LCPU
L02SCPU, L02SCPU-P, L02CPU, L02CPU-P, L06CPU, L06CPU-P,
L26CPU, L26CPU-P, L26CPU-BT, L26CPU-PBT
RCPU
R04CPU, R08CPU, R16CPU, R32CPU, R120CPU
*
1
For the module of software version K (manufactured in August, 1998) or later,
only the RRPA (automatic refresh) command can be used.
*
2
For the module of software version A (manufactured in August, 1998) or later,
only the RRPA (automatic refresh) command can be used.