Filter
Top Products
3 - 12
MELSEC-
A
3 SPECIFICATIONS AND FUNCTIONS
3.3.4 Combination of D75P2 main functions and auxiliary functions
With positioning control using the D75P2, the main functions and auxiliary functions
can be combined and used as necessary. A list of the main function and auxiliary
function combinations is given below.
A
uxiliary functions
Functions characteristic
to machine zero point
return
Zero point return retry
function
Zero point shift function
Main functions
Combination with operation
pattern.*
1
Zero point return
control
Machine zero point return control
Data setting method zero point return
control
High-speed zero point return control
– –
Main positioning
control
Position control
1-axis linear control
– –
2-axis linear
interpolation control
– –
1-axis fixed-dimension
feed control
(Continuous path control
cannot be set)
– –
2-axis fixed-dimension
feed control
(interpolation)
(Continuous path control
cannot be set)
– –
2-axis circular
interpolation control
– –
Speed control
(Only independent positioning
control can be set)
– –
Speed/position changeover control
(Continuous path control
cannot be set)
– –
Other control
Current value change
(Continuous path control
cannot be set)
– –
JUMP command
(Independent positioning
control cannot be set)
– –
Manual control
JOG operation
– –
Manual pulse generator operation
– –
: Always combine, : Combination possible, : Combination limited, : Combination not possible, –: Setting invalid
*
1
The operation pattern is one of the "positioning data" setting items.
*
2
Change the current value using the positioning data. Disable for a start of positioning start No. 9003.