Filter
Top Products
2 - 4
MELSEC-
A
2 SYSTEM CONFIGURATION
2.2 List of configuration devices
The positioning system using the D75P2 is configured of the following devices.
No. Part name Type Remarks
1 Positioning module
AJ65BT-D75P2-
S3
–
2
AD75 software
package
SW1IVD-AD75P-E
DOS/V personal computer software package*
1
SW0D5C-AD75P-E For details, refer to the GX Configurator-AP Operating Manual.
3 Personal computer
DOS/V personal
computer
(Prepared by user)
Refer to the AD75 Software Package Operating Manual for details.
4 Teaching unit
AD75TU Ver. D
or more
Unit for setting, monitoring and testing the D75P2 parameters and
positioning data.
5 Conversion cable
A1SD75-C01H
Length 30cm Cable for connecting RS-422 cable and D75P2.
A1SD75-C01HA
6
Connection cable
(converter)
–
RS-232 cable for connecting D75P2 with DOS/V personal computer, and
RS-232/RS-422 converter. (Prepared by user)
Refer to the AD75 Software Package Operating Manual for details.
7 Drive unit – (Prepared by user)
8
Manual pulse
generator
–
(Prepared by user)
Recommended: MR-HDP01 (Mitsubishi Electric)
9
Connection cable
(dedicated)
AD75C20SNH*
2
For MR-H
Cable for connecting D75P2 with drive unit, manual
pulse generator or machine system input signal.
AD75C20SNJ2*
2
For MR-J2/J2S-A
AD75C20SC For MR-C
10
Connection cable
(prepared by user)
–
Cable for connecting D75P2 with drive unit, manual pulse generator or
machine system input signal. (Prepared by user)
Refer to manual of connected device.
*
1
Compatible as AD75P2-S3.
*
2
Compatible with absolute position detection system.
Important
To use the D75P2, either the "AD75 software package" or "Teaching unit" is required.