Filter
Top Products
5 - 108
MELSEC-
A
5 DATA USED FOR POSITIONING CONTROL
Setting item Setting details
Cd.27
Step mode
When using step operation, set which unit to step with.
Cd.28
Step start information
When using step operation, set whether to continue or restart operation.
Cd.29
Skip command
Set "1" to skip the current positioning.
Cd.30
New torque value
To change the " Md.45 Torque limit stored value", set the new estimated torque
limit stored value.
Set the value within the " Pr.18 Torque limit setting value" range.
Cd.31
Positioning starting point No.
Set the "start point No. (1 to 50)" for executing block start (positioning).
(If setting the value other than 1 to 50, process it as "1".)