DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-91Multimedia Call Handling
1
Figure Notes
Figure 1-27. Typical ESM connections
!
CAUTION:
The TN2207 circuit pack is the only pack allowing connection of an ESM to
the DEFINITY ECS switch.
Troubleshooting MMCH
■ ‘‘64 Kbps Calls Terminate but Far End Receives 56 Kbps Indication’’
■ ‘‘Calls Terminate with No Audio’’
■ ‘‘Some Parties Cannot Be Heard by Others (Audio Subsetting)’’
■ ‘‘Calls Terminate with No Video’’
■ ‘‘Calls Terminate Correctly but Are Unstable’’
■ ‘‘Synchronization’’
■ ‘‘Voice-Activated Switching Problems’’
■ ‘‘No Switching, Full Motion Video’’
■ ‘‘Video Never Switches to a Particular Party’’
■ ‘‘Audio Echo’’
■ ‘‘Endpoint or I-MUX in Loopback Mode’’
1. Port B Y-cable connector to a TN787
Multimedia Interface (MMI) circuit pack
2. Port A Y-cable connector to a TN2207 PRI
circuit pack
3. 25-pair Y-cable
4. 356A adapter
5. D8W cord connected to 356A
adapter port 1
6. Expansion Service Module (ESM)
7. Port B on compatible primary rate
interface (PRI) card
cydf012 RPY 100697
1
2
4
5
3
6
7