DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-304status system
2
status system
This command displays the status, mode, and operational attributes of the
SPE(s), TDM and Packet busses, tone-clock circuit pack(s), and emergency
transfer switch of single or all cabinets in the system.
!
CAUTION:
The purpose of this command is to provide general information about the
cabinet status. This information may not display correctly when the cabinet
is in a transient period. In this case, wait for 1 minute and enter the
command again.
Current
Hardware Path
Location, maintenance name, and alarm information for each
hardware component making up the current path of the link. The
path begins at the Packet Interface in the SPE and terminates at the
circuit path terminating the other end of the link.
Faulted
Hardware Path
If the link encounters a fault, the system reroutes it (if possible) over
an alternate route. If this has taken place, the faulted path is
displayed on page 2 of the report. The location, maintenance
name, and alarm information for each hardware component making
up the most recent faulted path is shown.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status system
cabinet 1st-cabinet
: PPN
Examples:
status system 1st-cabinet
status system all-cabinets
init
inads
craft
cust
rcust
bcms
browse
none none