Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-27Logging On/Off
1
updated until the next hourly poll, or a
clear measurements security-violations
command is entered. Once a non-super-user has changed the password, the
user must wait 24 hours to change the password again.
Security is enhanced by providing a logoff notification screen to a system
administrator at log off while either the facility test call or remote access features
are still administered. The administrator can be required to acknowledge the
notification before completing the logoff process. Logoff notification is
administered on the Login Administration screen.
Software releases are delivered to the customer with one customer “super-user”
login/password defined. The customer is required to administer additional
login/passwords as needed. The super-user login has full customer permissions
and can customize any login created.
Login permissions for a specified login can be set by the super-user to block any
object that may compromise switch security. Up to 40 administration or
maintenance objects commands can be blocked for a specified login in.
System-wide commands are grouped into three command categories. Each of
the three command categories has a group of command subcategories listed
under them, and each command subcategory has a list of command objects that
the commands acts on. A super-user can set a users permissions to restrict or
block access to any command in these categories. These categories are
displayed on the Command Permissions Categories form.The three main
categories are:
■ Common Commands
— Display Administrative and Maintenance Data
— System Measurements
■ Administration Commands
— Administer Stations
—Administer Trunks
— Additional Restrictions
— Administer Features
— Administer Permissions
■ Maintenance Commands
— Maintain Stations
— Maintain Trunks
— Maintain Systems
— Maintain Switch Circuit Packs
— Maintain Process Circuit Packs