Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-3busyout board
2
Output
The following example shows the output for the
busyout access-endpoint
22502
command and assumes that access endpoint ports for extension 22502
are in cabinet 1, carrier C, slot 11, circuit 1 to 6. The responses display on a
test-by-test basis with one line of data for each test result.
Field descriptions
busyout board
This command puts all the ports associated with the specified access endpoint
in a maintenance busy (craft busy) state. No periodic or scheduled tests are
performed on the busied out access endpoint ports until they are released. When
the access endpoint ports are maintenance busy, the access endpoint is
removed from active service on the switch, meaning that no call processing
activity can include the busied objects because terminals on the administered
ports do not receive dial-tone. Warning alarms are generated on each busied out
port in the access endpoint. The
release access-endpoint
command returns all
the ports associated with the specified access endpoint to operation.
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance Name
Name of maintenance object (WAE-PORT = wideband access
endpoint; TIE-DS1 = single port access endpoint)
Alt. Name
The alternate way of identifying the maintenance object, in this
case, the extension number of the access endpoint.
Result
Test result: Pass, Fail, Abort
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
busyout access-endpoint 22502 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1101 WAE-PORT 22502 PASS
01C1102 WAE-PORT 22502 PASS
01C1103 WAE-PORT 22502 PASS
01C1104 WAE-PORT 22502 PASS
01C1105 WAE-PORT 22502 PASS
01C1106 WAE-PORT 22502 PASS
Command Successfully Completed