DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-282status interface
2
status interface
This command displays the number of counters maintained by the PI (a front end
processor implementing packet layers and link layers of the BX.25 protocol and
the ISDN procedure-D protocols).
Output
The following example shows the output from the
status interface a1
command.
PNC
Port Network Connectivity (PNC) status for each port networks within a
cabinet. When multiple port networks exist, Carriers A, B, and C are
listed first and separated from Carriers D and E by a slash (for example,
up/up).
Time of Day
Current time of day acquired from the system.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
interface
location
print
Location of processor interface (PI)
board: (cabinet-carrier-position)
1 = first processor interface
2 = second processor interface
Report sent to printer
init
inads
craft
cust
rcust
bcms
browse
1 (one) none
status interface a1
PROCESSOR INTERFACE STATUS
Base Level Occupancy(low): 10
Base Level Occupancy(high): 25
Primary Queue Audit Error: 4
Secondary Queue Audit Error: 10
Translation Audit Error: 12
Protocol Timer Audit Error: 0
Hardware Sanity Timeout: 1
Hardware Resource Error: 12
Hardware Overload Error: 8