Lucent Technologies 555-233-119 Home Theater Server User Manual


  Open as PDF
of 1872
 
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-101list configuration
2
list configuration
This command generates a report listing the group specified, the type, code,
suffix, and vintage of the requested circuit packs as installed in the switch, and
all ports assigned to the circuit pack.
Interface Link
Identifies the physical link carrying this processor (virtual)
channel. Links numbered 1 through (4 times the number of PI
circuit packs) for the si model can be either
x.25
or
tcp/ip
. The
rest of the links (up to 25) must be
tcp/ip
.
Interface Chan
Identifies the BX.25 virtual channel number or the TCP/IP listen
port channel to carry this processor (virtual) channel. The channel
number 0 means any port can be used. Valid entries for link type
x.25 are
1
-
64
; for Ethernet or ppp,
0
,
5000
-
64500
.
Destination Node
Identifies the switch or adjunct at the far end of this link. Enter an
adjunct name, switch name, far end IP address, node ID, or leave
blank (default) for services local to this switch.
Destination Port
Identifies the port number of the destination. The number 0 means
any port can be used. Valid entries are
0
(default),
5000
-
64500
.
Session Local
Field ported forward from R6.
Session Remote
Field ported forward from R6.
Mach ID
Field ported forward from R6.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list
configuration
hardware-
group
print
schedule
See Hardware Groups below.
Report sent to printer.
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
1
Examples:
list configuration carrier 1c
schedule
list configuration port-network 1
list configuration stations print
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
none none