Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-40disable mst
2
disable mst
The
disable mst
command stops the message trace facility. If the trace was not
already disabled, the command inserts a GAP marker into the trace. The user
should execute the
disable mst
command when the trace is complete. If left
enabled, the trace continues to use CPU time until the time limit expires. Entering
disable mst
command has no effect on the system if the trace is already
disabled. To view the results of the trace, enter the
list mst
command.
disable suspend-alm-orig
The
disable suspend-alm-orig
command stops entries from the active Suspend
Alarm Origination table. This command disables all board entries that match a
specific physical board location.
NOTE:
This command does
not
disable
port entries.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
disable
administered-
connection
ac
number
all
Number of the administered
connection
Selects all administered connections
Examples:
disable administered-connection all
disable administered-connection 1
disable administered-connection 128
init
inads
craft
cust
rcust
mis
none none
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
disable mst
Example:
disable mat
init
inads
none none
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
disable
suspend-
alm-orig
board
location
Physical location of the replaced or
corrected board (does not support
port location)
Examples:
disable suspend-alm-orig 1C03
disable suspend-alm-orig 1E07
init
inads
craft
cust
rcust
none none