Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-117list measurements clan ethernet
2
Output
Field descriptions
list measurements clan ethernet
This command provides a 24-hour history of important packet-level statistics
from which you can infer some LAN performance characteristics. For example,
■ high collision counts could indicate high traffic on the LAN segment
(congestion on the bus).
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list
marked-ports
print
schedule
Report sent to printer.
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
1
Examples:
list marked-ports
list marked-ports print
list marked-ports schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
bcms
browse
none none
Port
The port address (cabinet-carrier-slot-circuit) of the marked port.
Board-Type
The type of circuit pack containing the marked port. If this circuit pack
information is no longer available because the circuit pack was
removed after the port was marked, the
Board-Type
field is blank.
list marked-ports
MARKED-PORT INFORMATION
Port Board-Type
1C0101 DIG-BD
1C0601
1C0702 DIG-BD
Command successfully completed