Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-203save announcements
2
save announcements
This command copies announcement data from the announcement board to the
MSS. The Card-Mem stores announcements for the system. By default,
announcement data writes to the MSS device in a simplex processor (SPE)
system.
If there integrated announcement boards exist, this command is allowed. The
system denies the
save announcement
command if no announcement data
modules and no NETCON data modules are administered.
Feature Interactions
!
WARNING:
Manager I is blocked for other activities until the command completes. (up
to 45 minutes).
■ If no announcement data module is administered, the system denies the
command.
■ If the announcement data module port is out of service or active
(performing an announcement playback), the system denies the
command.
■ If no announcements are on the board or a user is in an integrated
announcements session, the system denies the command.
■ If the board is currently uploading or downloading, the system denies the
command. Users cannot record integrated announcements after the
save
announcements
command commences even though 15 channels are
available for announcement playback (one is reserved for uploading and
downloading).
■ The save announcements command will not be allowed if the Mass
Storage System (MSS) is in use. The MSS may be in use by either another
user or by maintenance.
■ The standby processor must be in service with shadowing enabled, so
that the system can save announcements to the standby processor.
■ In case of a failure, technicians make announcement files consistent
across both MSS devices. Files become inconsistent due to hardware
failures or spontaneous processor interchanges. If announcement files are
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
save
announcements
spe-active
Forces the system to write
announcement data to
specified devices.
init
inads
craft
cust
rcust
none See below