Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-107ATM Tips
1
If you are administering the A500 through a telnet connection over
the Ethernet, this works, but it is worthwhile making sure the
Ethernet address is correct anyway.
b. If the customer is providing an Ethernet connection to the A500,
does the
Ethernet IP mask
field have the customer-provided
mask (typically something like
255.255.255.0
, although other
values are valid), as configured with the
admin address
command?
c. If the customer is providing an Ethernet connection to the A500,
does the
IP default router
field have the customer-provided
Internet address, as configured using the
admin gateway
command?
d. If the customer is providing an Ethernet connection to the A500 and
intends to upload to or download from a TFTP server, does the
TFTP server
field have the customer-provided Internet address,
as configured using the
tftp setserver
command?
e. Does the
ATM address
field have the customer- or
Lucent-provided network prefix (the first thirteen bytes and set by
using the
modify atmprefix
command)?
DEFINITY Administration
Is ATM PNC administered correctly?
1. Enter
list atm pnc
on the DEFINITY SAT. The cabinet, carrier and slot
positions of each administered TN230X board display as shown in Figure
1-33. Ensure that each board’s physical location matches the display.
Figure 1-33. Screen output for list atm pnc command
Alternatively, use the
list configuration UUC
command (non-control
cabinets) to confirm the PPN and EPN board locations and correct
insertion.
list atm pnc Page 1 SPE A
ATM PNC
PNC A-PNC B-PNC
Connection # LOC LOC
1 01B02
2 02A01