Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-313status tti
2
Output
The following example shows the output for the
status tti
command.
Field descriptions
TTI
Background
Task State:
State of the tti background maintenance task:
■ generating tti ports
:
■ removing tti ports
:
■ suspended
:
■ not active
:
■ completed - all ports translated
: the last execution
of the background task completed normally
■ completed - some ports not translated
: the task
completed due to resource exhaustion with some ports left
untranslated
TTI State:
The tti state: displays
off
(TTI feature not enabled for the system),
or if enabled, then the field displays what kind of tti ports are being
generated or removed (
voice
,
data
).
# of Boards
Completed:
Number of TTI-supported boards that have been processed by the
background maintenance task:
■ completed
: board has either had all its unadministered ports
translated as TTI ports or its TTI ports have been removed and
are now unadministered ports. This depends on whether the
TTI background task is generating or removing tti ports.
# of Boards
Left to
Process:
Number of TTI-supported boards that have not yet been
processed by the background maintenance task.
Percent
Complete:
Ratio of the of number of boards completed compared to the
number of boards left to process.
status tti Page 1 of 1
TTI STATUS
TTI Background Task State: generating tti ports
TTI State: voice
# of Boards Completed: 30
# of Boards Left to Process: 120
Percent Complete: 25
Elapsed Time since Task Started: 0:15