Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-211set signaling-group
2
Memory Card MOs Affected by This Command
NOTE:
While this option does not automatically downgrade CAP-MEM alarms,
changes to this options may downgrade alarms to warnings. This alarm
raises when memory card translation capacity exceeds 98% and is
intended to alert Services that larger flash cards may be required.
■ Memory Card Capacity (CAP-MEM)
Other MOs Affected by This Command
NOTE:
Although alarms on some MOs appear as warnings, the alarms should be
investigated with user-related problems.
■ EPN Maintenance Circuit Pack (MAINT)
■ ISDN-PRI Signaling Group (ISN-SGR)
■ Journal Printer (JNL-PRNT)
■ PMS Link (PMS-LINK)
■ PMS log printer (PMS-LOG)
■ Primary CDR Link (PRI-CDR)
■ Secondary CDR Link (SEC-CDR)
■ SPE Select Switches (SPE-SELEC)
■ Synchronization (SYNC)
■ System Communication Interface (PI-SCI)
■ System Printer (SYS-PRNT)
■ TDM Clock (TDM-CLK)
■ Tone Generator Circuit Pack (TONE-BD)
set signaling-group
This command upgrades secondary D-channel in specified signaling groups to
primary D-channels. Current primary D-channel then revert to secondary
D-channels. A signaling group is a collection of B-channels that designate single
D-channels or a set of D-channels signals over an ISDN-PRI.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
set
signaling-group
group
identifier
administered number associated
with each signaling group.
init
inads
craft
none none