DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-176ping
2
The ping command has 4 qualifiers:
■ ‘‘ping ip-address’’
■ ‘‘ping node-name’’
■ ‘‘ping board’’
■ ‘‘ping packet-length’’
ping ip-address
This command “pings” the given IP address of the destination to ping. The
command returns
■ the port used to perform the test
■ the pass/fail results of the test
■ the round-trip delay time for successful tests
■ the error code on tests that failed.
Action/
Object Qualifier Qualifier Description Permissions
1
1 You can place additional restrictions on the command by selecting the object “ip-address” on the Restricted
Object List:
Ty p e
change permissions
loginid
(an administered login such as inads), and press Enter.
Set the
Additional Restrictions
field to
y
in the Administration Commands section of the form.
Go to the second or third page of the form.
Enter
ip-address
in the list of Restricted Objects and press Enter.
Defaults
Feature
Interactions
ping ip-address
node-name
board
packet-
length
repeat
The IP address of the device to
ping in the following format:
www.xxx.yyy.zzz
Administered node name (use
display node-names
)
The location of the C-LAN circuit
pack (
UUCSS
)
Range: 64-1,500 bytes
1-100
Examples:
ping ip-address 192.68.3.26
ping ip-address 192.68.3.26
board 1C05
ping ip address 168.24.3.66
packet-length 1500
init
inads
craft
customer
packet
length =
64 bytes