Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-165monitor system
2
Field descriptions
monitor system
This command summarize the system’s condition. This on-line status report
automatically updates every minute (or by pressing the
UPDATE key) until the
command is canceled by pressing the
CANCEL key. For security reasons, the
cancel command automatically logs off technicians.
Overall system status is available with either view option. “View1” displays
attendant, maintenance, and traffic status. Attendant and maintenance status
update every minute and traffic status updates hourly. “View2” displays all
“View1” items, except hunt group measurements that are omitted from traffic
status portions. These screens contain simplified high-level information about the
system’s health. The
monitor system conn
command displays connection’s
status in the connection manager process. Data is collected frequently in the
connection manager for key information items used to create this report.
Date:
Current date and time.
Date
Date of the logged security violation shown as MM/DD (where MM =
month and DD = day).
Time
Time of the logged security violation shown as HH:MM (where HH =
the hour and MM = minute of the invalid access attempt).
Login
Login ID entered for the login violation attempt.
Port
Type of port used when login violation occurred. The following is a
table of valid port types:
MGR1
MGR1 represents a connection to a system SAT port. Connections are
either hardwired or dialed-up.
Ext
Extension assigned to the data module that failed during “logging in”
session. If a data module is not used, this field is blank.
Date
Date of the logged security violation shown as MM/DD (where MM =
month and DD = day).
Time
The time of the logged security violation shown as HH:MM (where HH
= the hour and MM = the minute).
TG No.
The trunk group number associated with the trunk from the failed
remote access attempt (remote access violations only).
Mbr
The trunk group member number associated with the trunk from the
failed remote access attempt (remote access violations only).
Ext
Extension that interfaces with remote access features (remote access
violations only).