Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-119list measurements clan ppp
2
Output
The following example shows the output from the
list measurements ethernet
command.
Field descriptions
list measurements clan ppp
This command provides a 24-hour history of important packet-level statistics
from which you can infer some LAN performance characteristics. For example,
■ Invalid frames—the number of frames that are misaligned
■ CHAP failures—Challenge Handshake Authentication Protocol—the
number of attempts for ppp authentication that failed
Date
The date that the data was collected.
Time
The current 15-minute interval in which the action was performed
CRC Check
The error count for CRC errors
Total
The total value of the counter on the board
NOTE:
The counter value can be up to 11 digits long because of the
32-bit counter on the board. After the occurrence of an “N/A,”
the delta equals the total. Busyout or release of a board or a
port, the
reset board
command, and reseating the board all
clear the firmware counters.
Delta
The difference between the current and the previous sample
Collision Count
The error count for collisions on the ethernet
list measurements clan ethernet 1C1017 Page 1 of x
Switch Name: sierra Date:4:07pm MON AUG 01,1999
C-LAN ETHERNET PERFORMANCE MEASUREMENT DETAILED REPORT
Date Time CRC Check Collision Count
total delta total delta
08/01 0308 650 50 650 250
08/01 0253 600 600 400 400
08/01 0238 N/A N/A N/A N/A
08/01 0223 1000000570 20 10000000570 20
08/01 0208 1000000550 10000000550 10000000550 10000000550