Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-5What’s new for R8csi
1
Administrable Loss Plan
The administrable Loss Plan feature provides the user with the capability to
administer the loss or gain applied on calls. This plan provides for dynamic
administration of loss levels per station, using 2- party loss tables, and an
algorithm that calculates 3, 4, 5, and 6-party conference loss plans. Such a
feature can be used to provide additional gain, for example, on connections
involving station sets whose users have hearing impairments.
Implementation of this plan involves the addition of a new field,
Digital Loss
Plan Modifications
: on the
system-parameters customer options
form.
Trac er ou te
This command provides the ability to trace the route of packets originated from
DEFINITY IP boards through the LAN. The output shows the ip address of each
router or host (hop) that the packets encounter and the time elapsed between
each hop. If a DEFINITY IP board has trouble communicating with a far-end
device, the traceroute command can determine “how far” packets get toward
the destination.
DEFINITY IP boards include:
■ TN799B (or later suffix) CLAN board
■ TN802B Medpro board
The output form lists:
■ Hops traversed from source to destination
■ IP addresses of the hop points and the final destination
■ Observed round-trip delay from the source to each hop point
If no reply is received from a potential hop point, the
IP Address
field contains
stars (*), which indicates a timeout condition.
The primary use of this command is to determine quickly and unambiguously if
the fault lies within Lucent-provided equipment or if the fault is with the LAN or
LAN administration to which the DEFINITY ECS switch is connected.
Incomplete Command Timeout
A time-out feature has been added to the MAINTENANCE-RELATED SYSTEM
PARAMETERS form (accessed by the command
change system parameters
maintenance
). This feature improves the operation of daily maintenance by
allowing maintenance routines to run that might otherwise not run. It also helps to
prevent the loss of translations that were not saved by the
save translation
command, and were also not saved because daily maintenance was prevented
from running prior to the system reset. Highlights of the feature include: