DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-34ALARM-PT (ALARM PORT)
3
ALARM-PT (ALARM PORT)
The Alarm Port maintenance object provides on-board maintenance for an
analog line port that is administered as an external device alarm port. Tests are
provided to verify the analog line port’s ability to detect an external device alarm.
The External Device Alarm (EXT-DEV) maintenance object is used for the
off-board external device alarm.
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1. Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); SS is the address of the slot in the carrier where the circuit
pack is located (for example, 01, 02, ..., etc.); and pp is the 2-digit port number
(for example, 01).
Full Name of MO
ALARM-PT MIN test port PCSSpp l Alarm-Port
ALARM-PT WRN test port PCSSpp sh Alarm-Port