DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-191release sp-link
2
release sp-link
This command reactivates busied out system printer links and resolves active
alarms for system printer links. The system printer link is a link from the switch to
an external printer. Adminstering system printer extensions to call system printers
creates the links.
Output
The following example shows the output from the
release sp-link
command.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release sp-link
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit) of busied out
maintenance objects. ( )
Maintenance Name
The type of maintenance object that is being busied out.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group number
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
release sp-link SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
SYS-PRNT PASS
Command Successfully Completed