Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-337CARD-MEM (Memory Card)
3
and relevant applications (for example, saving translations, saving
announcements) cannot be executed at the same time.
Table 3-146. TEST #693 Memory Card Erase/Write/Read Test
Error
Code
Tes t
Result Description/ Recommendation
1192 ABORT Applications are accessing the memory card.
1. Wait 10 minutes for the applications to complete.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2012
2106
2114
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2013
2100
none
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2110 ABORT No memory card is inserted.
1. Insert a formatted memory card into the slot at the Processor circuit
pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2111 ABORT Inserted memory card cannot be recognized.
1. Insert a formatted memory card into the slot at the Processor circuit
pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2112 ABORT Internal system error The inserted memory card is a "system-upgrade"
memory card.
1. Replace the inserted memory card with a user’s memory card.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2115 ABORT The memory card is write-protected.
1. Take the memory card out, and change the "write-protection" switch to
the "not-protected" position.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2113 ABORT The inserted memory card has only one directory file.
1. Enter the test card-mem command, and verify that the Memory Card
Directory Recovery Test (#699) passes. If the directory file cannot be
recovered, replace the memory card.
2. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page