DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-291status pms-link
2
Field descriptions
status pms-link
This command displays the status of the property management system interface
link. If the link displays even when a data base swap occurs between the switch
and PMS. If the link is down, the display indicates the number of times the switch
tried to set up the link.
A property management system (PMS) is a stand-alone computer system which
can be integrated with the switch to enhance the service capability for a
hotel/motel.
For general information on PMS links, see the description of the
‘‘busyout
pms-link’’ command.
Output
The following example shows the output from the
status pms-link
command.
Location
Location: (cabinet-carrier-circuit pack)
Service State standb
y is used in place of
in-service
for the standby
packet-interface.
Total links
Total number of links
Active links
Number of links in use
Failed links
Number of failed links (equals # of total links - # of active links)
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
pms-link
print
Report sent to printer. init
inads
craft
cust
browse
none none
status pms-link
PMS LINK STATUS
Physical Link State: down
Protocol State: down
Number of Retries: 3
Maintenance Busy? no