Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-200restore announcements
2
Error message
In duplicated systems, the message,
Cannot reset translation-ID without standby SPE being
accessible
means that both processors must be sane and operational.
■ A standby SPE that has been busied out must be released (
release
standby-spe
).
■ Check that the SPE-select switches on the DUPINT circuit pack are in the
AUTO position.
restore announcements
This command copies announcement data from the active MSS devices to
announcement boards.
Feature Interactions
!
WARNING:
Manager I is blocked for other activities until the command completes (up
to 45 minutes).
■ If no announcement data module and no NETCON data module are
administered, the system denies the command.
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
restore
announcements
print
schedule
Report sent to printer
Command is validated
and then a scheduling
form displays to
schedule execution of
the command. The
command is then
placed in the
command queue and
is executed at the
specified time. The
information displayed
by the command is
sent to the system
printer instead of the
screen.
1
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
Tape-based:
announcement
copies from active
processor’s tape to
the announcement
board.
Card-mem based:
Announcement
data copies from
active processor’s
to the
announcement
board.
see below