DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-147ATM-EI (Expansion Interface Circuit Pack)
3
2. Add an ATM PNC connection (see ‘‘Adding ATM PNC connections’’
above).
B-side ATM-EI — Critical Reliability
1. Enter
status pnc
and ensure that the A-PNC is active.
If it is not active, request a pnc interchange using the
reset pnc
interchange
command.
2. Enter
busyout pnc-standby
.
3. Enter
list config car
and verify that an ATM circuit pack is administered
for the new location. If it is not, add the ATM circuit pack translations.
4. Enter
busyout atm pnc
n
(connection number)
b-pnc
.
5. Enter
change atm pnc
n
(connection number) and change circuit pack
location for the B side.
6. Enter
release pnc-standby
.
Changing ATM address of a Standby ATM-PNC EI — Critical
Reliability
1. Enter
busy pnc-standby
.
2. Enter
change atm pnc
n
(connection number) and change the ATM
address for the standby side.
3. Enter
release pnc-standby
.