DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-25change system-parameters maintenance
2
1. Make a note of the current entries in the Alarm Origination and CPE Alarm
fields so you can restore them later.
2. Change the
Alarm Origination to OSS Numbers
field to
neither
.
3. Change the
CPE Alarm Activation Level
field to
none
.
4. If daily scheduled maintenance must remain idle during a maintenance
procedure, set the
Start Time
field to a time after the session ends. If
daily Scheduled Maintenance is running and needs to be deactivated, set
the
Stop Time
field to one minute after the current time.
5. Press
Enter and verify that the screen displays the message:
Command successfully completed
NOTE:
For earlier releases of system software, disable Cleared Alarm
Notification and Restart Notification before submitting the form.
NOTE:
When finished working on the switch be sure to return all fields to
their original settings.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
change
system-parameters
maintenance
Examples:
change system-parameters
maintenance
init
inads
craft
cust
rcust
none none