DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-943PR-MAINT (Maintenance Processor)
3
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in the table below. By clearing
error codes associated with the
MTP Reset Test,
for example, you may also clear
errors generated from other tests in the testing sequence.
Notes:
a. Refer to PROCR for a description of these tests.
b. Refer to MEMORY [386 systems only] for a description of these tests.
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
1. D = Destructive; ND = Nondestructive
Processor Software Initiated Interrupt Test (#77) (a) X X ND
Processor ROM Checksum Test (#80) (a) X X ND
Processor Non-maskable Interrupt Test (#82) (a) X X ND
Processor Sanity Timer Test (#83) (a) X D
MTP Reset Test (#101) X D
MTP Dual Port Ram Test (#104) X D
MTP Sanity Handshake Test (#106) X X ND
MAP Manager I Loop Around Test (#228) X X ND
MTP Analog Loop Around Test (#103) X X ND
MTP Outpulse Relay Test (#102) X X ND
MTP Aux Loop Around Test (#229) X X ND
Read All Memory Test (#85)(b) X ND
Memory Error Detection Test (#87)(b) X X ND
Text Checksum Test (#86)(b) X ND
Memory Functional Test (#332) (b) X D
Memory Board Check Test (#631) (b) X X ND