Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-158ATM-EI (Expansion Interface Circuit Pack)
3
1. Test the ATM-EI circuit pack (
test board UUCSS
).
2. Follow the repair procedures suggested for Test #1258.
s. Error Type 3329: on-board LANHO chip is insane, possibly due to a
problem in Packet Bus arbitration, the transmission line frame, or the
circuit pack itself. The circuit pack cannot talk to the packet bus.
If the packet bus is alarmed:
1. Resolve PKT-BUS errors, if any. The probability of this error being
related to Packet bus problem increases with the number of other
circuit packs using the Packet bus that are also displaying this
error.
If the Packet Bus is
not
alarmed:
1. Reset the circuit pack (
reset board UUCSS
).
2. If the problem persists, replace the ATM-EI circuit pack.
If the system has a duplicated PNC, and the in-line error received is from
an active ATM-EI, the system switches to the standby PNC.
!
CAUTION:
If the system does not have duplicated PNC, services to the EPN
could be disrupted.
t. Error Type 3585, 3586 (Major board alarm): failure of critical components
involved in the operation of the circuit pack, and the switch may no longer
recognize the circuit pack. If the system has a duplicated PNC and the
in-line error received is from an active ATM-EI, the system switches to
standby PNC.
!
CAUTION:
If the system does not have duplicated PNC, services to the EPN
could be disrupted.
Error
Type Description Aux Data indicates
2817 DSP test failure The Aux Data field contains the
following information about the failed
DSPs:
■ X is the number of talker DSPs
■ Y is the number of listener DSPs
■ Z is the number of
echo-cancelling DSPs
2818 One or more DSPs failed DSP number that has failed