DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-362test pms-link
2
Output
The following example is the output for the
test packet-interface 1a1
command.
The responses display on a test-by-test basis with one line of data for each test
result.
test pms-link
This command performs the specified property management system link tests on
the specified pms link by checking to see if the link is accessible and then
performing a reset on the link (long test only). For general information on PMS
links, see the description in the
‘‘busyout pms-link’’
section. For information on
what a PMS is and does, see the description in the
‘‘status pms-link’’
section.
test packet-interface 1a1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A PKT_INT 887 PASS
01A PKT_INT 888 PASS
Command Successfully Completed