DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-16busyout tdm
2
Output
The following example is a display of the
busyout station
command.
Field descriptions
busyout tdm
The
busyout tdm
command places the specified tdm bus in a maintenance
busy state. No periodic or scheduled tests are performed on the busied out bus
until it is released. When the object is maintenance busy it is deactivated (no call
processing activity may include the busied object). Warning alarms (error type
18) are generated on each busied out tdm bus, so that INADS can determine the
state of the objects. The command,
release tdm
, reactivates the specified tdm
bus.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout
station
extension
Extension number (per
dial-plan)
Examples:
busyout station 10020
busyout station 32770
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance Name
Type of busied out maintenance object
Alt. Name
Alternate means to identify maintenance object: extension
number
Result
Test result: Pass, Fail, Abort
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
busyout station 1002 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1102 DIG-LINE PASS
Command successfully completed