Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-5ADM-CONN (Administered Connection)
3
ADM-CONN (Administered
Connection)
An Administered Connection provides an end-to-end connection between two
access endpoints or data modules. This connection is automatically established
when the administered connection is administered and is due to be active. An
error is logged when an administered connection cannot be established or when
an established administered connection fails. An alarm is logged when a
connection cannot initially be established or fails and cannot be reestablished.
An alarming strategy is supported on a per administered connection basis. An
alarm is raised for a connection when either the number of consecutive failed
attempts to establish the connection reaches the alarm threshold or it can be
determined that a failed attempt to establish was due to an administered error.
The alarm raised ("major," "minor," "warning," or "none") is specified in the "Alarm
Type" field of the Administered Connection Administration Form.
Error Log Entries and Test to Clear Values
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run
1
1. Where N is an appropriate Administered Connection number determined via the PORT field from the
Alarm or Error Log.
Full Name of MO
ADM-CONN MAJOR status administered-connection N Administered Connection
ADM-CONN MINOR status administered-connection N Administered Connection
ADM-CONN WARNING status administered-connection N Administered Connection
Table 3-4. Administered Connection Error Log Entries
Error Type Aux Data
Associated
Te s t
Alarm
Level
On/Off
Board
Test to Clear
Value
0 (a)(b)(c)(k) Any None Any OFF None
1 (a)(b)(c)(d)(e) Any None Any OFF None
2 (a)(b)(c)(f) Any None Any OFF None
6 (a)(b)(c)(g) Any None Any OFF None
16 (a)(b)(c)(k) Any None Any OFF None
17 (a)(c)(h) Any None Any OFF None
18 (a)(b)(c)(i) Any None Any OFF None
21 (a)(b)(c)(g) Any None Any OFF None
Continued on next page