Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-30Logging On/Off
1
To List Logins
1. Enter the command
list logins
.
The system displays the following information for all current logins:
■ Name
■ Service level
■ Status (active, inactive, disabled, svn-disabled, void)
■ Password aging cycle length
The system displays only those logins with the same, or lower, service
level as the requestor.
To Remove a Login
1. Enter the command
remove login [login name]
.
The system displays the Login Administration form.
2. Press the
Enter key to remove the login, or press Cancel to exit the remove
login procedure without making a change.
To Test a Login
1. Enter your login name at the login prompt.
2. After the user enters the correct login name and password and the login is
administered correctly, the system displays the command line interface.
Administering Customer Logins and Forced
Password Aging
Adding Customer Logins and Assigning Initial
Password
To add a customer login you must have administrative permissions:
1. Enter the
add login [name]
command to access the Login Administration
form.
2. Enter your super-user password in the
Password of Login Making
Change
field on the Login Administration form.
The 3- to 6-character login name (characters 0-9, a-z, A-Z) entered with
the
add login [name]
command is displayed in the Login’s Name field.
3. Enter
customer
in the
Login Type
field. The system default for the
Login Type
field is “customer.” The maximum number of customer
logins of all types is 11.