Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Objects
3-665EXT-DEV ADMIN? Y (External Device Alarm)
3
EXT-DEV ADMIN? Y (External Device
Alarm)
NOTE:
Use this Maintenance Object when the
External Device Alarm
Admin?
field on the
change system-parameters customer-options
form is
set to
y
. You must have INADS or INIT login permission to administer
EXT-DEV Alarm.
Generic 3i Maintenance circuit packs each have alarm leads which can be
connected to external devices such as Uninterruptible Power Supplies (UPS) or
adjuncts such as AUDIX. Certain conditions on the external device close the
contacts on the alarm leads to notify the switch which in turn originates an
EXT-DEV alarm.
The special locations UUmajor and UUminor are used to designate the major or
minor maintenance board alarm connection for cabinet UU. The major/minor
designation specifies the port, not the alarm level associated with the
connection; for example, the “major” port can be administered as a major, minor,
or warning alarm, and the “minor” port can be administered as a major, minor or
warning alarm. In addition Analog line ports can also be administered as external
device alarms.
NOTE:
An unadministered maintenance board external device alarm port, that is
sensing a contact closure will have an entry in the Error Log and in the
Alarm Log. INADS will not receive warning alarms.
The Processor monitors the EXT-DEV alarm leads. The system only recognizes
pairs connected to the 1M and 1m (ALARM MONITOR) leads. Refer to the
DEFINITY Communications System Generic 1 and Generic 3i Wiring,
555-204-111, for more details.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run Full Name of MO
EXT-DEV MAJOR test eda-external-device-alrm physical
location
External Device Alarm
EXT-DEV MINOR test eda-external-device-alrm physical
location
External Device Alarm
EXT-DEV WARNING test eda-external-device-alrm physical
location
External Device Alarm