Filter
Top Products
DEFINITY ECS Release 8.2 Maintenance for R8.2csi
555-233-119 Issue 1
April 2000
Maintenance Commands
2-72display memory-configuration
2
display memory-configuration
This command indicates the total memory available for the active processor.
Action
The level of recovery performed by the system. The recovery levels
follow:
Reset system 1 (Warm)
Reset system 2 (Cold-2)
Reset system 3 (Cold-1)
Reset system 4 (Reboot)
Reset system 5 (Extended Reboot)
Escalated
Whether the restart was escalated to a higher level to clear the problem.
There is a software escalation strategy that can cause a higher level
restart than the one previously performed to be executed if the need
arises.
Carrier
Indicates the carrier on which the recovery was performed (
1A
).
Time
The date (month and day) and time of the restart.
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
memory-
configuration
long
short
print
schedule
Option required to display the SPE
Flash ROM and DRAM
configuration.
1
Report sent to printer
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
2
Examples:
display memory-configuration
display memory-configuration
long
1 The long and short options are the same.
2 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
browse
none none